Views: 0 Author: Site Editor Publish Time: 2021-11-08 Origin: Site
Any equipment will have a relevant service life. Once the time is up, failures will inevitably occur. Of course, rebar bender is also the same during use. The occurrence of failures not only delays production efficiency, but also brings more to the enterprise. Therefore, for some minor failure problems, we can choose to learn related solutions to reduce the economic expenditure of rebar bender. Then, what are the failures that will occur during the use of rebar bender?
Motor failure
If rebar bender cannot be turned on, it will not operate correctly, or the motor cannot be shaken, it does not respond, or it stops suddenly after it is turned on. There are two similar situations. There are two processing and reasoning methods. Replace the motor or use professional testing. tool. Then check whether the transmission parts are stuck when rebar bender is working.
Control system failure
Rebar bender can operate normally, but the processing accuracy cannot be guaranteed, and there is often an offset. For this, we can habitually see whether the running parts are loose. Sometimes there will be abnormal noises from the left and right turning keys, or it cannot be classified in a normal way. It is likely that the parts are loose or damaged. During the halving process, if the shearing equipment fails to cut effectively, this needs to be done. Understand whether the equipment such as the stroke limit switch easy eccentric wheel set by the shearing machine can operate normally.
A professional & qualified manufacturer of portable rebar cutter, portable rebar bender, rebar straightening machine, hydraulic punching machine, cold cut saw.
7*24h online service always is here.
Welcome to conact or pay a visit to us!