 |
| Quantity: | |
|---|---|
Portable Rebar Straightening Machine – Brought to you by PROSHARP brand
HRS-32 Rebar Straightening Machine Brief:
· HRS-32 Rebar Straightening Machine–Used to straighten steel bars in construction sites, the product is light in weight, small in size and easy to carry. The operation process is simple and safe!
· HRS-32 Rebar Straightening Machine–Packed in a plastic suitcase, with additional hydraulic oil pot and tool kit.
HRS-32 Rebar Straightening Machine Advantages:
· Motor: newly upgraded high-power 1600W carbon brush motor, strong power, low noise and long life
· Head frame material: high-strength special iron alloy forging material, high toughness, not easy to deform, smooth and flat surface
· Pump body material: using 600# spherical molybdenum round steel fine processing, high temperature resistance, friction resistance, high pressure resistance
· Cylinder material: high-performance aluminum cylinder, fast heat dissipation, smooth oil return, light weight and good appearance
· Knife shaft sealing ring: Japan imported NOK brand, friction resistance, strong sealing, and long service life
· Pump body design process: original four-piston hole design, the straightening efficiency is significantly improved by 30% compared with ordinary market machines
· Cylinder design process: The unique piston cylinder design increases the oil storage capacity and avoids the problem of rubber ring oil sacs
· Fast straightening speed: Straighten 22-32mm steel bars within 5-6 seconds
· Light weight: 23KG, easy to carry, maneuverable and easy to use
HRS-32 Rebar Straightening Machine Technical Parameters:
Brand | PROSHARP |
Model | HRS-32 |
Type | Rebar Straightening Machine |
Colour | Red, blue |
Voltage | 220V/110V |
Power | 1600W |
Cutting speed | 5-6S |
Maximum. Rebar | 32 mm/1.26 inch |
Minimal. Rebar | 22 mm/0.866 inch |
Rebar material type | Medium carbon steel, low carbon steel, round steel, thread steel |
Handle length | Pull up 20CM |
HRS-32 Rebar Straightening Machine Product Info:
| Product Size | |
Length(mm) | 40 |
Width(mm) | 190 |
Height(mm) | 230 |
Weight(kg) | 23kg |
| Package Size | |
Length(mm) | 800 |
Width(mm) | 215 |
Height(mm) | 300 |
Weight(kg) | 33kg |
Toolbox includes | Hydraulic oil can, tool kit, operation manual, inner PE, outer 7-layer corrugated paper |
Portable Rebar Straightening Machine – Brought to you by PROSHARP brand
HRS-32 Rebar Straightening Machine Brief:
· HRS-32 Rebar Straightening Machine–Used to straighten steel bars in construction sites, the product is light in weight, small in size and easy to carry. The operation process is simple and safe!
· HRS-32 Rebar Straightening Machine–Packed in a plastic suitcase, with additional hydraulic oil pot and tool kit.
HRS-32 Rebar Straightening Machine Advantages:
· Motor: newly upgraded high-power 1600W carbon brush motor, strong power, low noise and long life
· Head frame material: high-strength special iron alloy forging material, high toughness, not easy to deform, smooth and flat surface
· Pump body material: using 600# spherical molybdenum round steel fine processing, high temperature resistance, friction resistance, high pressure resistance
· Cylinder material: high-performance aluminum cylinder, fast heat dissipation, smooth oil return, light weight and good appearance
· Knife shaft sealing ring: Japan imported NOK brand, friction resistance, strong sealing, and long service life
· Pump body design process: original four-piston hole design, the straightening efficiency is significantly improved by 30% compared with ordinary market machines
· Cylinder design process: The unique piston cylinder design increases the oil storage capacity and avoids the problem of rubber ring oil sacs
· Fast straightening speed: Straighten 22-32mm steel bars within 5-6 seconds
· Light weight: 23KG, easy to carry, maneuverable and easy to use
HRS-32 Rebar Straightening Machine Technical Parameters:
Brand | PROSHARP |
Model | HRS-32 |
Type | Rebar Straightening Machine |
Colour | Red, blue |
Voltage | 220V/110V |
Power | 1600W |
Cutting speed | 5-6S |
Maximum. Rebar | 32 mm/1.26 inch |
Minimal. Rebar | 22 mm/0.866 inch |
Rebar material type | Medium carbon steel, low carbon steel, round steel, thread steel |
Handle length | Pull up 20CM |
HRS-32 Rebar Straightening Machine Product Info:
| Product Size | |
Length(mm) | 40 |
Width(mm) | 190 |
Height(mm) | 230 |
Weight(kg) | 23kg |
| Package Size | |
Length(mm) | 800 |
Width(mm) | 215 |
Height(mm) | 300 |
Weight(kg) | 33kg |
Toolbox includes | Hydraulic oil can, tool kit, operation manual, inner PE, outer 7-layer corrugated paper |
