Availability: | |
---|---|
Quantity: | |
HL-45 Battery Powered Cable Cutter is used for cutting copper / aluminum cables and armored cables. The utility model has the advantages of high efficiency, convenient operation, automatic retraction, 360° rotating cutting head, etc. It adopts lithium ion power, motor drive, single-chip microcomputer control and high-pressure hydraulic system. It is an ideal tool for electric power construction site.
HL-45 Battery Powered Cable Cutter is used for cutting copper / aluminum cables and armored cables. The utility model has the advantages of high efficiency, convenient operation, automatic retraction, 360° rotating cutting head, etc. It adopts lithium ion power, motor drive, single-chip microcomputer control and high-pressure hydraulic system. It is an ideal tool for electric power construction site.
Features
1. Tool Head can be easily opened if remove Locking Pin.
2. Guillotine type blades for less jam.
3. Pistol Type Tool Body design for better balance and easy handling.
4. Two button control concept for easy operation by one hand.
5. Manually retract ram in case of need.
6. Automatically retract ram to original position when complete cutting.
7. Quickly stop motor if release switch.
8. Ram can hold position when release switch and can be partially retracted.
9. Powerful motor ensure quick crimp.
10. Li- ion battery with high capacity and require short charging time.
11. LED illuminate work area and indicate battery capacity, working condition.
Specification
Mode | HL-45 Battery Powered Cable Cutter |
Max. cutting force | 60KN |
Crimping range | Φ45mm (Cu/Al cable and armored cable) |
Stroke | 50mm |
Hydraulic oil | Shell Tellus T15# |
Ambient temperature | -10 - 40℃ |
Battery | 18v 3.0Ah Li-Ion |
Cutting cycle | 5s-12s(depending on the connector size) |
Cutting/charger | Approx. 130 times (Cu150 mm2) |
Charging voltage | AC 100V〜240V; 50〜60Hz |
Charging time | Approx. 1.5 hours |
OLED display | display voltage, temperature, crimping times, errors information |
Accessories | |
Blade | 1 pcs |
Battery | 2 pcs |
Charger | 1 pcs |
Sealing ring of cylinder | 1 set |
Sealing ring of safety valve | 1 set |
Application Range
1. Solar energy
2. charging pile
3. Traffic
4. Wind energy
5. Control cabinet
6. Motor
7. Mechanical
HL-45 Battery Powered Cable Cutter is used for cutting copper / aluminum cables and armored cables. The utility model has the advantages of high efficiency, convenient operation, automatic retraction, 360° rotating cutting head, etc. It adopts lithium ion power, motor drive, single-chip microcomputer control and high-pressure hydraulic system. It is an ideal tool for electric power construction site.
HL-45 Battery Powered Cable Cutter is used for cutting copper / aluminum cables and armored cables. The utility model has the advantages of high efficiency, convenient operation, automatic retraction, 360° rotating cutting head, etc. It adopts lithium ion power, motor drive, single-chip microcomputer control and high-pressure hydraulic system. It is an ideal tool for electric power construction site.
Features
1. Tool Head can be easily opened if remove Locking Pin.
2. Guillotine type blades for less jam.
3. Pistol Type Tool Body design for better balance and easy handling.
4. Two button control concept for easy operation by one hand.
5. Manually retract ram in case of need.
6. Automatically retract ram to original position when complete cutting.
7. Quickly stop motor if release switch.
8. Ram can hold position when release switch and can be partially retracted.
9. Powerful motor ensure quick crimp.
10. Li- ion battery with high capacity and require short charging time.
11. LED illuminate work area and indicate battery capacity, working condition.
Specification
Mode | HL-45 Battery Powered Cable Cutter |
Max. cutting force | 60KN |
Crimping range | Φ45mm (Cu/Al cable and armored cable) |
Stroke | 50mm |
Hydraulic oil | Shell Tellus T15# |
Ambient temperature | -10 - 40℃ |
Battery | 18v 3.0Ah Li-Ion |
Cutting cycle | 5s-12s(depending on the connector size) |
Cutting/charger | Approx. 130 times (Cu150 mm2) |
Charging voltage | AC 100V〜240V; 50〜60Hz |
Charging time | Approx. 1.5 hours |
OLED display | display voltage, temperature, crimping times, errors information |
Accessories | |
Blade | 1 pcs |
Battery | 2 pcs |
Charger | 1 pcs |
Sealing ring of cylinder | 1 set |
Sealing ring of safety valve | 1 set |
Application Range
1. Solar energy
2. charging pile
3. Traffic
4. Wind energy
5. Control cabinet
6. Motor
7. Mechanical
Brand: PROSHARP
Model: RC-16
Power: 1000W
Rebar Diameter: 4mm/0.157inch - 16mm/0.63inch
Cutting Speed: 1-1.5S
A professional & qualified manufacturer of portable rebar cutter, portable rebar bender, rebar straightening machine, hydraulic punching machine, cold cut saw.
7*24h online service always is here.
Welcome to conact or pay a visit to us!