info@prosharptool.com     +86 13915033441
You are here: Home » Blog » News » Portable rebar bender operating regulations

Portable rebar bender operating regulations

Views: 0     Author: Site Editor     Publish Time: 2023-12-07      Origin: Site

1. Check whether the mechanical properties are good, and keep the table and the tabletop of the workbench and bending machine; and prepare a variety of core shaft tool gear.

2. Install the core shaft according to the diameter of the processing product and the requirements of the bending machine, the forming shaft, the iron shaft or a variable gear, the diameter of the core shaft should be 2.5 times the diameter of the product.

3. Check the core axis. There should be no damage and cracks in the block and turntable. The protective cover is tight and reliable.

4. When operating, insert one end of the product in the gap of the fixed -preserved turntable, and the other end of the bending machine is close to the fuselage and fix it with the hand. Check the fuselage. start.

5. During the operation, it is strictly forbidden to replace the core shaft and change angle and speed regulation.

6. When bending products, it is strictly forbidden to process the diameter, roots and mechanical speed of the product specified in the mechanical regulations.

7. When bending high hardness or low alloy products, the maximum diameter of the label replacement should be replaced in accordance with the regulations of the mechanical nameplate, and the corresponding core axis should be replaced.

8. It is strictly forbidden to stand in the operating radius of curved products and the fixed side of the body. The bending semi -finished products should be stacked neatly, and the hooks must not be facing up.

9. When the turntable is turned, it must be performed after stopping.

10. After the operation, cleaning the scene, maintenance machinery, power -off lock box.


  • ABOUT US
  • FAQ
  • SERVICE
  • CATALOG

A professional & qualified manufacturer of portable rebar cutter, portable rebar bender, rebar straightening machine, hydraulic punching machine, cold cut saw.   

7*24h online service always is here. 

Welcome to conact or pay a visit to us!

 

Mobile / WhatsApp :+86 13915033441

 

Product Category

New

Contact us