+86 13915033441
You are here: Home » Blog » News » Several factors that cause the wear of hydraulic rebar bending machine

Several factors that cause the wear of hydraulic rebar bending machine

Views: 0     Author: Site Editor     Publish Time: 2022-07-12      Origin: Site

After a period of use, the internal parts of hydraulic rebar bending machine will be worn to a certain extent. If it is not maintained in time, the service life of the equipment will be reduced, and the work process will also be affected during the work. But if it is usually well protected, it will reduce the occurrence of this phenomenon.

Prosharp rebar bender manufacturers

Several factors that cause wear:

I. In practical applications, there are many relevant personnel who operate the steel bar bending machine who do not understand the operating procedures and mechanical performance of the machine, and they are likely to misoperate in use, resulting in damage to the steel bar bending machine.

I. We must clearly know what the maximum load of our mechanical equipment is, so as to prevent the machinery from being damaged due to excessive load during use.

II. The load of the steel bar bending machine must be accelerated evenly, so that the machine can change under a relatively stable load.

III. The wear of the steel bar bending machine is caused by the failure of the protection work. The oil pollution of the bending hoop parts overflows, which has a huge impact on the original operating environment, resulting in aggravated wear during operation. In addition, the operating frequency of the parts continues to increase. , Under the influence of many factors, the operation failure occurs.

  • FAQ

A professional & qualified manufacturer of portable rebar cutter, portable rebar bender, rebar straightening machine, hydraulic punching machine, cold cut saw.   

7*24h online service always is here. 

Welcome to conact or pay a visit to us!


Mobile / WhatsApp :+86 13915033441


Product Category


Contact us