The method of improving the work efficiency of hydraulic rebar bender

1. Before the bending machine is processed, the machine can be carried out for a few minutes before inserting the tiring end of the reinforced bars into the fixed gap of the turntable.

2. Before using hydraulic rebar bender, check whether the mechanical performance is good, and the tabletop table and curved countertop are kept horizontally.

3. Check whether the block, turntable, etc. of the core axis are damaged. If there is a problem, deal with it in time.

4. Prepare the various core shaft tool gear, and install the core shaft shaft in accordance with the diameter of the processing steel bars and the requirements of the bending machine. The core axis block and the turntable should not be damaged and cracks.

5. During processing, insert one end of the reinforcement to bend in the gap of the turntable fixed, and the other end is fixed with the fuselage and tightened with the hand. When curved steel bars, it is strictly forbidden to process the diameter, roots and mechanical speed of the steel bars specified in the mechanical regulations.

6. When bending high hardness or low alloy steel bars, the diameter should be greater in accordance with the requirements of the mechanical nameplate, and the corresponding core shaft should be replaced. It is strictly forbidden to stand in the operating radius of the bending steel bars and the fixed side of the fuselage.