When installing portable rebr cutter bender, ensure that it is stable

The composition of the portable rebr cutter bender  includes: motor, belt transmission mechanism, flywheel, gear reduction mechanism, with rotary key mechanism, crankshaft ram and exchangeable cutter. At present, it has been widely used in our life, and basically covers all areas of life, which brings great convenience to the work of mechanical equipment personnel, and also ensures everyone's safety, shortens working time, and improves work efficiency. Precautions for installation of steel bar cutting machine: ensure smoothness!

First of all, when installing the portable rebr cutter bender, it is necessary to carefully study its installation location, and it must be installed on a relatively flat and relatively solid ground. Because its weight is very heavy, if it cannot be placed in a relatively flat place smoothly, then their work will not be very stable. Long-term use will have a great impact on the machine, and it will also affect its performance. service life. And if it cannot be placed on a solid ground, then due to its own weight, it will cause the machine to drop, and it will also have a certain impact on the use effect.

Secondly, when installing the load-bearing frame, it must be installed according to the corresponding steps, that is to say, the center of the material trough on the load-bearing frame should be aligned with the corresponding guide cylinder and straightening cylinder, etc. These holes must not be installed. If it is wrong or reversed, it will affect the normal operation of the machine.

In addition, when installing the steel bar cutting machine, it is necessary to maintain the stability of the entire machine to ensure that its internal structure is also stable, and after the installation is completed, it is necessary to check the corresponding lines to see if all the lines are normal. If there is any damage to the parts, then try running it again. Only after completing such a process can it be used in the next time. If there is any damage, it must be repaired again. Check to make sure that the machine is installed correctly, so as to ensure that there is no danger of any kind during use.