Views: 0 Author: Site Editor Publish Time: 2021-12-29 Origin: Site
During operation, insert one end of rebar that needs to be bent into the turntable, fix it in the prepared gap, and fix the other end close to the machine body, and then press it by hand to check the fixation of portable rebar bending machine body to ensure Install on the side blocking the steel bars to start the machine;
During the operation, the angle and speed cannot be changed, and no oil can be added. When bending, the diameter and quantity of steel bars that exceed the specified diameter and quantity cannot be placed. If this happens, the consequences will be unimaginable;
It is strictly forbidden to stand around, except for the staff, to ensure safe operation;
The height of the bend should not exceed the maximum diameter of the device.
