 |
| Quantity: | |
|---|---|
Portable Rebar Bender -Brought to you by PROSHARP brand
HRB-16 Rebar Bender Brief:
· HRB-16 Portable Rebar Bender–Hydraulic Rebar Bender can bend 10-16mm diameter steel bars from 0 to 100 degrees at the work site, helping to save valuable hours!
· PROSHARP Portable Rebar Bender–Strong power, fast bending, can quickly bend steel bars with a diameter of 10-16mm in 2.5 seconds. This Portable Electric Rebar Bender is packed in a plastic carrying case and comes with an additional hydraulic oil pot and tool kit.
HRB-16 Rebar Bender Advantages:
· Motor: Newly upgraded high-power 1100W carbon brush motor, strong power, low noise and long life
· Head frame material: high-strength special iron alloy forging material, high toughness, not easy to deform, smooth and flat surface
· Pump body material: using 600# spherical molybdenum round steel fine processing, high temperature resistance, friction resistance, high pressure resistance
· Cylinder material: high-performance aluminum cylinder, fast heat dissipation, smooth oil return, light weight and good appearance
· Knife shaft sealing ring: Japan imported NOK brand, friction resistance, strong sealing, and long service life
· Pump body design process: the original four-piston hole design, the bending efficiency is significantly improved by 30% compared with ordinary market machines
· Cylinder design process: The unique piston cylinder design increases the oil storage capacity and avoids the problem of rubber ring oil sacs
· Quick bending: within 2.5 seconds, quickly bend steel bars with a diameter of 10-16mm
· Light weight: 13.8KG, easy to carry, maneuverable and easy to use
HRB-16 Rebar Bender Technical Parameters:
Brand | PROSHARP | PROSHARP |
Model | HRB-16A | HRB-16B |
Type | Rebar Bender | Rebar Bender |
Colour | Red, blue | Red, blue |
Voltage | 220V/110V, custom accept | 220V/110V, custom accept |
Power | 1100W | 1100W |
Bending speed | 2-2.5 S | 2-2.5 S |
Maximum. Rebar | 16 mm/0.63 inch | 16 mm/0.63 inch |
Minimal. Rebar | 10 mm/0.394 inch | 10 mm/0.394 inch |
Rebar material type | Low carbon steel, round steel, thread steel | Low carbon steel, round steel, thread steel |
Handle length | Pull back 14CM | Pull up 19CM |
HRB-16 Rebar Bender Product Info:
| Product Size | ||
Model | HRB-16A | HRB-16B |
Length(mm) | 630 | 545 |
Width(mm) | 150 | 200 |
Height(mm) | 155 | 150 |
Weight(kg) | 13.8kg | 13.8kg |
| Package Size | ||
Model | HRB-16A | HRB-16B |
Length(mm) | 670 | 600 |
Width(mm) | 200 | 210 |
Height(mm) | 255 | 290 |
Weight(kg) | 17.5kg | 19kg |
Toolbox includes | Hydraulic oil can, tool kit, operation manual, inner PE, outer 7-layer corrugated paper | |
Original OEM Supplier Of Portable Rebar Bender
Why PROSHARP TOOL?
Superior performance, advanced technique, beautiful appearance.
Guaranteed quality, safe and reliable, passed CE, ROHS.
Easy to operate, low noise, security & environmental.
Have been received by customers all over the world.
Do you wish to purchase a bulk order of handheld rebar benders? Here in PROSHARP TOOL, we can surely meet your production requirements. If you are looking for something that is not listed above, you may request for rebar cutter customization, and please contact us immediately. We are more than willing to assist and collaborate with you. Contact
●How is annual production capacity of PROSHARP portable rebar bender？
PROSHARP has 100+ employees and 120+ sets of high-precision production equipment including 38 Taiwan brand machining centers, 15 CNC lathes, 6 high-precision grinding machines... with annual production capacity of 100,000 units/sets.
Portable Rebar Bender -Brought to you by PROSHARP brand
HRB-16 Rebar Bender Brief:
· HRB-16 Portable Rebar Bender–Hydraulic Rebar Bender can bend 10-16mm diameter steel bars from 0 to 100 degrees at the work site, helping to save valuable hours!
· PROSHARP Portable Rebar Bender–Strong power, fast bending, can quickly bend steel bars with a diameter of 10-16mm in 2.5 seconds. This Portable Electric Rebar Bender is packed in a plastic carrying case and comes with an additional hydraulic oil pot and tool kit.
HRB-16 Rebar Bender Advantages:
· Motor: Newly upgraded high-power 1100W carbon brush motor, strong power, low noise and long life
· Head frame material: high-strength special iron alloy forging material, high toughness, not easy to deform, smooth and flat surface
· Pump body material: using 600# spherical molybdenum round steel fine processing, high temperature resistance, friction resistance, high pressure resistance
· Cylinder material: high-performance aluminum cylinder, fast heat dissipation, smooth oil return, light weight and good appearance
· Knife shaft sealing ring: Japan imported NOK brand, friction resistance, strong sealing, and long service life
· Pump body design process: the original four-piston hole design, the bending efficiency is significantly improved by 30% compared with ordinary market machines
· Cylinder design process: The unique piston cylinder design increases the oil storage capacity and avoids the problem of rubber ring oil sacs
· Quick bending: within 2.5 seconds, quickly bend steel bars with a diameter of 10-16mm
· Light weight: 13.8KG, easy to carry, maneuverable and easy to use
HRB-16 Rebar Bender Technical Parameters:
Brand | PROSHARP | PROSHARP |
Model | HRB-16A | HRB-16B |
Type | Rebar Bender | Rebar Bender |
Colour | Red, blue | Red, blue |
Voltage | 220V/110V, custom accept | 220V/110V, custom accept |
Power | 1100W | 1100W |
Bending speed | 2-2.5 S | 2-2.5 S |
Maximum. Rebar | 16 mm/0.63 inch | 16 mm/0.63 inch |
Minimal. Rebar | 10 mm/0.394 inch | 10 mm/0.394 inch |
Rebar material type | Low carbon steel, round steel, thread steel | Low carbon steel, round steel, thread steel |
Handle length | Pull back 14CM | Pull up 19CM |
HRB-16 Rebar Bender Product Info:
| Product Size | ||
Model | HRB-16A | HRB-16B |
Length(mm) | 630 | 545 |
Width(mm) | 150 | 200 |
Height(mm) | 155 | 150 |
Weight(kg) | 13.8kg | 13.8kg |
| Package Size | ||
Model | HRB-16A | HRB-16B |
Length(mm) | 670 | 600 |
Width(mm) | 200 | 210 |
Height(mm) | 255 | 290 |
Weight(kg) | 17.5kg | 19kg |
Toolbox includes | Hydraulic oil can, tool kit, operation manual, inner PE, outer 7-layer corrugated paper | |
Original OEM Supplier Of Portable Rebar Bender
Why PROSHARP TOOL?
Superior performance, advanced technique, beautiful appearance.
Guaranteed quality, safe and reliable, passed CE, ROHS.
Easy to operate, low noise, security & environmental.
Have been received by customers all over the world.
Do you wish to purchase a bulk order of handheld rebar benders? Here in PROSHARP TOOL, we can surely meet your production requirements. If you are looking for something that is not listed above, you may request for rebar cutter customization, and please contact us immediately. We are more than willing to assist and collaborate with you. Contact
●How is annual production capacity of PROSHARP portable rebar bender？
PROSHARP has 100+ employees and 120+ sets of high-precision production equipment including 38 Taiwan brand machining centers, 15 CNC lathes, 6 high-precision grinding machines... with annual production capacity of 100,000 units/sets.
