 |
| Quantity: | |
|---|---|
Portable Cordless Rebar Cutter – Brought to you by PROSHARP brand
BC-20 Electric Cordless Rebar Cutter Brief:
· BC-20 Rebar Cutter–Portable Electric Rebar Cutter for construction sites, power engineering, and fire fighting. The product is light in weight, small in size, easy to carry, and has a wide range of applications!
· BC-20 Rebar Cutter is cold cutting, no sparks, no dust, safe and reliable in the cutting process. No need power cables, easy to work at high altitude, high-precision cutting action is clean, easy to complete the cutting of 4-16mm diameter steel bars.
· BC-20 Rebar Cutter is packed in a plastic suitcase, equipped with hydraulic oil pot, lithium battery, battery charger, operation manual.No matter where your project is, this machine can handle it!
BC-20 Electric Rebar Cutter Advantages:
· Motor: 400W brushless motor, strong power, low energy consumption, low noise, long life
· Head frame material: high-strength special iron alloy forging material, high toughness, not easy to deform, smooth and flat surface
· Pump body material: using 600# spherical molybdenum round steel fine processing, high temperature resistance, friction resistance, high pressure resistance
· Cylinder material: high-performance aluminum cylinder, fast heat dissipation, smooth oil return, light weight and good appearance
· Knife shaft sealing ring: Japan imported NOK brand, friction resistance, strong sealing, and long service life
· Pump body design process: original design of three plunger holes, cutting efficiency is significantly improved by 30% compared with ordinary market machines
· Cylinder design process: The unique piston cylinder design increases the oil storage capacity and avoids the problem of rubber ring oil sacs
· Battery life: equipped with two 5000 mAh lithium batteries, which can be cut continuously for 110-120 times on a single charge
· Quick cut: within 4 seconds, quickly cut steel bars with a diameter of 4-20mm
· Light weight: 8KG, easy to carry, maneuverable and easy to use
BC-20 Electric Rebar Cutter Technical Parameters:
Brand | PROSHARP |
Model | BC-20 |
Type | Cordless Electric Rebar Cutter |
Colour | Silver gray |
Rebar cutting method | Cold extrusion |
Voltage | 18V 5Ah |
Power | 400W |
Cutting speed | 3.5-4 S |
Cut-off range | 4-20mm |
Battery capacity | 5000mA |
Work efficiency after single charge | Cut times of 110-120 |
Battery charging time | 90 min |
Battery charger input | AC110-240V 50-60Hz |
BC-20 Electric Rebar Cutter Product Info:
| Product Size | |
Length(mm) | 270 |
Width(mm) | 370 |
Height(mm) | 110 |
Weight(kg) | 8kg |
| Package Size | |
Length(mm) | 500 |
Width(mm) | 155 |
Height(mm) | 430 |
Weight(kg) | 14.5kg |
Toolbox includes | Hydraulic oil can, tool kit, operating manual, battery (2), battery charger and side handle |
Portable Cordless Rebar Cutter – Brought to you by PROSHARP brand
BC-20 Electric Cordless Rebar Cutter Brief:
· BC-20 Rebar Cutter–Portable Electric Rebar Cutter for construction sites, power engineering, and fire fighting. The product is light in weight, small in size, easy to carry, and has a wide range of applications!
· BC-20 Rebar Cutter is cold cutting, no sparks, no dust, safe and reliable in the cutting process. No need power cables, easy to work at high altitude, high-precision cutting action is clean, easy to complete the cutting of 4-16mm diameter steel bars.
· BC-20 Rebar Cutter is packed in a plastic suitcase, equipped with hydraulic oil pot, lithium battery, battery charger, operation manual.No matter where your project is, this machine can handle it!
BC-20 Electric Rebar Cutter Advantages:
· Motor: 400W brushless motor, strong power, low energy consumption, low noise, long life
· Head frame material: high-strength special iron alloy forging material, high toughness, not easy to deform, smooth and flat surface
· Pump body material: using 600# spherical molybdenum round steel fine processing, high temperature resistance, friction resistance, high pressure resistance
· Cylinder material: high-performance aluminum cylinder, fast heat dissipation, smooth oil return, light weight and good appearance
· Knife shaft sealing ring: Japan imported NOK brand, friction resistance, strong sealing, and long service life
· Pump body design process: original design of three plunger holes, cutting efficiency is significantly improved by 30% compared with ordinary market machines
· Cylinder design process: The unique piston cylinder design increases the oil storage capacity and avoids the problem of rubber ring oil sacs
· Battery life: equipped with two 5000 mAh lithium batteries, which can be cut continuously for 110-120 times on a single charge
· Quick cut: within 4 seconds, quickly cut steel bars with a diameter of 4-20mm
· Light weight: 8KG, easy to carry, maneuverable and easy to use
BC-20 Electric Rebar Cutter Technical Parameters:
Brand | PROSHARP |
Model | BC-20 |
Type | Cordless Electric Rebar Cutter |
Colour | Silver gray |
Rebar cutting method | Cold extrusion |
Voltage | 18V 5Ah |
Power | 400W |
Cutting speed | 3.5-4 S |
Cut-off range | 4-20mm |
Battery capacity | 5000mA |
Work efficiency after single charge | Cut times of 110-120 |
Battery charging time | 90 min |
Battery charger input | AC110-240V 50-60Hz |
BC-20 Electric Rebar Cutter Product Info:
| Product Size | |
Length(mm) | 270 |
Width(mm) | 370 |
Height(mm) | 110 |
Weight(kg) | 8kg |
| Package Size | |
Length(mm) | 500 |
Width(mm) | 155 |
Height(mm) | 430 |
Weight(kg) | 14.5kg |
Toolbox includes | Hydraulic oil can, tool kit, operating manual, battery (2), battery charger and side handle |
