 |
| Quantity: | |
|---|---|
Portable Rebar Bender - Brought to you by PROSHARP brand
HRB-32 Rebar Bender Brief:
· HRB-32 Portable Rebar Bender–Hydraulic Rebar Bender can bend 22-32mm diameter steel bars from 0 to 100 degrees at the work site, helping to save valuable hours!
· HRB-32 Portable Rebar Bender–Strong power, fast bending, can quickly bend 22-32mm steel bars in 6 seconds.
· HRB-32 Portable Rebar Bender-By adjusting the angle of the die head, the bending angle of small diameter steel bars can be achieved.
· HRB-32 Portable Rebar Bender-Packed in a plastic suitcase, with additional hydraulic oil pot and tool kit.
HRB-32 Rebar Bender Advantages:
· Motor: newly upgraded high-power 1600W carbon brush motor, strong power, low noise and long life
· Head frame material: high-strength special iron alloy forging material, high toughness, not easy to deform, smooth and flat surface
· Pump body material: using 600# spherical molybdenum round steel fine processing, high temperature resistance, friction resistance, high pressure resistance
· Cylinder material: high-performance aluminum cylinder, fast heat dissipation, smooth oil return, light weight and good appearance
· Knife shaft sealing ring: Japan imported NOK brand, friction resistance, strong sealing, and long service life
· Pump body design process: the original four-piston hole design, the bending efficiency is significantly improved by 30% compared with ordinary market machines
· Cylinder design process: The unique piston cylinder design increases the oil storage capacity and avoids the problem of rubber ring oil sacs
· Quick bending: within 6 seconds, quickly bend the 22-32mm diameter steel bar
· Light weight: 23KG, easy to carry, maneuverable and easy to use
HRB-32 Rebar Bender Technical Parameters:
Brand | PROSHARP |
Model | HRB-32 |
Type | Rebar Bender |
Colour | Red, blue |
Voltage | 220V/110V, custom accept |
Power | 1600W |
Bending speed | 5-6S |
Maximum. Rebar | 32 mm/1.26 inch |
Minimal. Rebar | 22 mm/0.866 inch |
Rebar material type | Low carbon steel, round steel, thread steel |
Handle length | Pull up 20CM |
HRB-32 Rebar Bender Product Info:
| Product Size | |
Length(mm) | 640 |
Width(mm) | 190 |
Height(mm) | 230 |
Weight(kg) | 23kg |
| Package Size | |
Length(mm) | 800 |
Width(mm) | 215 |
Height(mm) | 300 |
Weight(kg) | 33kg |
Toolbox includes | Hydraulic oil can, tool kit, operation manual, inner PE, outer 7-layer corrugated paper |
Portable Rebar Bender - Brought to you by PROSHARP brand
HRB-32 Rebar Bender Brief:
· HRB-32 Portable Rebar Bender–Hydraulic Rebar Bender can bend 22-32mm diameter steel bars from 0 to 100 degrees at the work site, helping to save valuable hours!
· HRB-32 Portable Rebar Bender–Strong power, fast bending, can quickly bend 22-32mm steel bars in 6 seconds.
· HRB-32 Portable Rebar Bender-By adjusting the angle of the die head, the bending angle of small diameter steel bars can be achieved.
· HRB-32 Portable Rebar Bender-Packed in a plastic suitcase, with additional hydraulic oil pot and tool kit.
HRB-32 Rebar Bender Advantages:
· Motor: newly upgraded high-power 1600W carbon brush motor, strong power, low noise and long life
· Head frame material: high-strength special iron alloy forging material, high toughness, not easy to deform, smooth and flat surface
· Pump body material: using 600# spherical molybdenum round steel fine processing, high temperature resistance, friction resistance, high pressure resistance
· Cylinder material: high-performance aluminum cylinder, fast heat dissipation, smooth oil return, light weight and good appearance
· Knife shaft sealing ring: Japan imported NOK brand, friction resistance, strong sealing, and long service life
· Pump body design process: the original four-piston hole design, the bending efficiency is significantly improved by 30% compared with ordinary market machines
· Cylinder design process: The unique piston cylinder design increases the oil storage capacity and avoids the problem of rubber ring oil sacs
· Quick bending: within 6 seconds, quickly bend the 22-32mm diameter steel bar
· Light weight: 23KG, easy to carry, maneuverable and easy to use
HRB-32 Rebar Bender Technical Parameters:
Brand | PROSHARP |
Model | HRB-32 |
Type | Rebar Bender |
Colour | Red, blue |
Voltage | 220V/110V, custom accept |
Power | 1600W |
Bending speed | 5-6S |
Maximum. Rebar | 32 mm/1.26 inch |
Minimal. Rebar | 22 mm/0.866 inch |
Rebar material type | Low carbon steel, round steel, thread steel |
Handle length | Pull up 20CM |
HRB-32 Rebar Bender Product Info:
| Product Size | |
Length(mm) | 640 |
Width(mm) | 190 |
Height(mm) | 230 |
Weight(kg) | 23kg |
| Package Size | |
Length(mm) | 800 |
Width(mm) | 215 |
Height(mm) | 300 |
Weight(kg) | 33kg |
Toolbox includes | Hydraulic oil can, tool kit, operation manual, inner PE, outer 7-layer corrugated paper |
